- The table you are cutting on must be flat.
- Pressing too hard with the glass cutter will produce imperfections along the freshly cut glass edge. Press just hard enough to make an even, steady noise and a consistent score line.
- Here is a fast way to cut small pieces. The only tools you will need are a glass cutter and straight edge. First, make all your score lines on the glass. Then turn the glass over and tap out the pieces.
- When making a long cut, do not lift the glass as you break it with breaking pliers. Lifting can put a slight bow in the glass, which causes it to separate erratically. Instead, leave the glass flat on the table, pull a little out from the edge, and break it with piers.
- After scoring, use breaking pliers to separate a narrow piece of glass.
Tags:
Comments (1)
Write comment
You must be logged in to post a comment. Please register if you do not have an account yet.
