Please fill all required fields
    Firing Ramp Conversion Table
     
    Step One:  
    Choose whether you are converting a Fahrenheit to Celsius or vice versa
    and go to Table One or Two depending on your conversion requirement
     
    Step Two:  
    Then in the blue boxes enter each of the ramp degrees per min or hour
     
    Example: I have a firing schedule that only displays the ramp
    temperatures in Fahrenheit. But my kiln works on Celsius. In this
    case, I choose Table One. The first segment says to increase at a rate of
    150 degress fahrenheit per hour. On the line Segment One, in the
    blue box under "Enter the Ramp temp in Fahrenheit" I enter 150
    The result is 83 degrees celsius.
     
     
    TABLE ONE:  
    Converting Fahrenheit to Celsius Ramp Schedule  
           
      Enter the ramp temp Ramp Conversion  
      in Fahrenheit F -> C  
    Segment One  
    Segment Two  
    Segment Three  
    Segment Four  
    Segment Five  
    Segment Six  
    Segment Seven  
    Segment Eight  
    Segment Nine  
    Segment Ten  
    Segment Eleven  
    Segment Twelve  
           
     
    TABLE TWO:  
    Converting Celsius to Fahrenheit Ramp Schedule  
           
      Enter the ramp temp Ramp Conversion  
      Ramp (C) C -> F  
    Segment One  
    Segment Two  
    Segment Three  
    Segment Four  
    Segment Five  
    Segment Six  
    Segment Seven  
    Segment Eight  
    Segment Nine  
    Segment Ten  
    Segment Eleven  
    Segment Twelve